ASME A112.6.3:2016 pdf download

ASME A112.6.3:2016 pdf download Floor and Trench Drains
1 GENERAL1.1 Scope
This Standard covers floor, area, adjustable floor, andtrench drains that are used inside of,or outside andimmediately adjacent to, building structures. ThisStandard specifies design requirements, definitions,nomenclature, outlet types and connections, grate-freeareas, top-loading classifications, materials, and fin-ishes. Seam-welded,socket-type,stainless steel fabri-cated drains are covered in ASME A112.3.1.
1.2 Alternatives
The requirements of this Standard are not intendedto prevent the use of alternative designs, materials,ormethods of construction, provided such alternativesmeet the intent and requirements of this Standard.
1.3 Units of Measurement
The values stated in either Sl (metric) or U.s.Custom-ary (yard / pound) units of measure are equivalent inapplication; however, each system is to be used indepen-dently of the other. In this Standard,U.S.Customaryunits are shown in parentheses.Combining values fromthe two systems can result in nonconformance with theStandard.
1.4 Illustrations
The illustrations included in this Standard areintended only to describe and portray typical drainsand are not intended to restrict design or to specifyrequirements.
1.5 Reference Standards
This Standard refers to the following publications,and where such reference is made,it shall be to thecurrent edition of the publication, including all amend-ments published thereto:
ASME A112.3.1，Stainless Steel Drainage Systems forSanitary DwV,Storm, and Vacuum Applications,Above- and Below-Ground
ASMEA112.18.1/CSA B125.1, Plumbing Supply FittingsASME B16.25,Buttwelding Ends
Publisher: The American Society of MechanicalEngineers (ASME),Two Park Avenue, New York,NY 10016-5990 (www.asme.org)
ASTM A48,Standard Specification for Gray IronCastings
ASTM A74,Standard Specification for Cast lron SoilPipe and Fittings
ASTM A307 ,Standard Specification for Carbon SteelBolts,Studs,and Threaded Rod 60 0O0 PSITensileStrength
ASTM A536,Standard Specification for Ductile IronCastings
ASTM A563,Standard Specification for Carbon andAlloy Steel Nuts
ASTM A888，Standard Specification for Hubless CastIron Soil Pipe and Fittings for Sanitary and StormDrain,Waste, and Vent Piping Applications
ASTM B584,Standard Specification for Copper AlloySand Castings for General Applications
ASTM C564,Standard Specification for Rubber Gasketsfor Cast Iron Soil Pipe and Fittings
ASTM C1440, Standard Specification for ThermoplasticElastomeric (TPE) Gasket Materials for Drain,Waste,and Vent (Dwv),Sewer, Sanitary and Storm PlumbingSystems
ASTM D1784,Standard Specification for Rigid Poly(Vinyl Chloride) (PvC) Compounds and ChlorinatedPoly (vinyl Chloride)(CPvc) Compounds
ASTM D2661, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,Waste, and vent Pipe and Fittings
ASTM D2665,Standard Specification for Poly (VinylChloride) (PVC)Plastic Drain,Waste, and Vent Pipeand Fittings
ASTM D3350,Standard Specification for PolyethylenePlastics Pipe and Fittings Materials
ASTM D3965, Standard Classification System and Basisfor Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
ASTM D4101, Standard Specification for PolypropyleneInjection and Extrusion Materials
ASTM D4329,Standard Practice for FluorescentUltraviolet(UV)Lamp Apparatus Exposure of PlasticsASTM G152, Standard Practice for Operating OpenFlame Carbon Arc Light Apparatus for Exposure ofNonmetallic Materials
ASTM G153,Standard Practice for Operating EnclosedCarbon Arc Light Apparatus for Exposure ofNonmetallic Materials
Publisher: ASTM International,100 Barr Harbor Drive,West Conshohocken, PA 19428-2959 (www.astm.org)